corsabala
Member
Big nozzles 0.360mm 1.9 TDI VE AGR - Video
Hi everyone,
I have a 1.9 TDI 90hp AGR engine with GT2260VK + 11mm pump head rotor + 0.360mm nozzles installed. I would like know what's the best configuration bar to this nozzles to the first and second stage.
Currently they are calibrated to 240 bar, but i'm not sure if this is the best configuration to big nozzles.
Last month has been hard to start the engine with the low temperatures. When starts, the engine dropped a lot of white smoke.
Please see the video: https://youtu.be/VJgjS_lpRvg
I thought the problem was the fuel pump, so I replace her last week by another one but the problem remains.
Can the problem be the configuration bar of the injector nozzles?
PS: The problem just remains in cold start. When the temperature is high the engine starts perfectly.
Hi everyone,
I have a 1.9 TDI 90hp AGR engine with GT2260VK + 11mm pump head rotor + 0.360mm nozzles installed. I would like know what's the best configuration bar to this nozzles to the first and second stage.
Currently they are calibrated to 240 bar, but i'm not sure if this is the best configuration to big nozzles.
Last month has been hard to start the engine with the low temperatures. When starts, the engine dropped a lot of white smoke.
Please see the video: https://youtu.be/VJgjS_lpRvg
I thought the problem was the fuel pump, so I replace her last week by another one but the problem remains.
Can the problem be the configuration bar of the injector nozzles?
PS: The problem just remains in cold start. When the temperature is high the engine starts perfectly.
Last edited: