View Single Post
Old November 19th, 2019, 11:22   #4
SilverGhost
Veteran Member
 
SilverGhost's Avatar
 
Join Date: Mar 2005
Location: Back in So Flo - St Lucie
Default

DTC / Description
P2452
"Diesel Particulate Filter Differential Pressure Sensor Circuit"

Monitor Strategy Description
Exhaust Pressure Sensor Circuit
Short to Battery voltage

Malfunction Criteria and Threshold Value
l Signal voltage > 4.9 V

Monitoring Time Length
l 480 ms

MIL Illumination
l 2 DCY

Component Diagnostic Procedure
– Check the Differential Pressure Sensor -G505-. Refer to → Chapter „Differential Pressure Sensor - G505-, Checking“/.
– Check the Exhaust Pressure Sensor 1 -G450-. Refer to → Chapter „Exhaust Pressure Sensor 1 -G450-, Checking“

Differential Pressure Sensor - G505-, Checking
General Description
Exhaust gas temperature sensors are positive temperature coefficient (PTC) sensors. They measure the temperature of the exhaust gas. The Engine Control Module -J623- uses the signals from exhaust gas temperature sensors to calculate the amount of contamination in the diesel particulate filter, also to protect the turbocharger from unacceptably high exhaust gas temperatures. The diesel particulate filter contamination status is calculated using these signals from the exhaust gas temperature sensors, together with the signals from; Exhaust Pressure Sensor 1 -G450-, Differential Pressure Sensor -G505-, Exhaust Pressure Sensor 2 -G451-, Mass Airflow Sensor -G70-, and Heated Oxygen Sensors. The signal also serves as component protection in order to protect the diesel particulate filter and turbocharger from excessively high exhaust gas temperatures.
Special tools and workshop equipment required
t Multimeter.
t Wiring Diagram.
t Scan Tool.
Test requirements
l Fuses OK.
l Battery voltage OK.
l Switch OFF all electrical and electronic accessories.
l Vehicles with Auto. Transmission, ensure Selector Lever position is in “P.”.
l Vehicles with Man. Transmission, ensure Shifter Lever position is in “N” with Parking Brake applied.
l Coolant Temperature: ≥ 80 C.
l Observe all safety precautions: → Chapter „Safety Precautions“.
l View clean working conditions: → Chapter „Clean Working Conditions“.
l For Hybrid vehicles refer to: → Chapter „High Voltage System General Warnings“.
SilverGhost is offline   Reply With Quote
 
Page generated in 0.08895 seconds with 8 queries
[Output: 16.92 Kb. compressed to 15.43 Kb. by saving 1.49 Kb. (8.82%)]