Liter_o_Cola
New member
Installing an 11mm pump. The problem I’m having is from TDC, I can only turn the crank about 1/2 a turn to verify everything is timed correctly before starting. The car was healthy before I started the install and now I’m scared to start it. I’ve removed the glow plugs to eliminate the possibility of a compression issue. Checked the TDC in the cam and flywheel, both being perfect, the IP is also good, but not a contributing factor. Any ideas at this point would be greatly appreciated as I’ve exhausted all resources trying to solve the issue. I’ll even throw a $50 bounty on whoever can show me the way to alleviate the issue!! I need to get it running by tomorrow!