View Single Post
Old November 11th, 2019, 18:09   #10
Veteran Member
Join Date: Jun 2006
Location: Omaha NEEEBRASKA
Fuel Economy: Never high enough but always trying for more.... (See signature)

Originally Posted by tleader View Post
As for all the bcm wiring and what exact numbered pins I used I canít remember without tearing it apart to look. I know it was the unused pins for the rear euro LED tail light wiring. Thatís kind of the beauty of the MQB platform, the unused pins can be reprogrammed for other uses. Search for a user of DV52, he has the same user name throughout many forums. He seems to be the one who spearheaded the info and spreadsheets for the pins and bcm info. I know I had read a ton of info on it and decided to tackle the wiring. Not really hard once u get the German translation down for all the light functions in the bcm. On the MK7, both the front and rear fogs work from the same pin on the euro switch. It must use a different resistance/signal to know when they are activated in the bcm. You canít just wire the trigger wire to the euro switch anymore to make the fog lights function like in the MK6 platform. Hope this helps some.

Sent from my iPhone using Tapatalk Pro
Thank ya!
Mrrogers1 is offline   Reply With Quote
Page generated in 0.06707 seconds with 8 queries
[Output: 15.77 Kb. compressed to 14.22 Kb. by saving 1.55 Kb. (9.82%)]