View Single Post
Old April 24th, 2011, 07:22   #7
jetta ,97
jetta ,97's Avatar
Join Date: Dec 2008
Location: Dallas (McKinney) ,TX ,USA
Fuel Economy: Very good

Originally Posted by Comiclown View Post
I have a 2000 Jetta TDI and I just ordered a regular valet key from a local dealer for $59.00. Have anyone tried the following steps ( I found them on to program a valet key (no fob)?

Get into your vehicle. Insert your valet key into the ignition and turn the key as far as you can in the "On" position without cranking the engine.

Get out of the car and close the door behind you, leaving the valet key in the ignition. Place your regular car key in the driver's door and turn the key to lock the car manually.

Remove the key from the driver's door. Push the "Unlock" button on your key fob twice.

Enter your car, turn the valet key to the "Off" position and remove it from the ignition. Your valet key is now programmed.


The procedure you post here is to reprogram remote . Valet key don't have remote.
What do you trying top reprogram, Remote on other key or Immobilizer?
If you want to reprogram immobilizer then info is here:

Important Note: Unless you ALREADY have the SKC information for your vehicle and components then you will NOT be able to do any of the Immobilizer functions.
Click this link for more information.
I do any repair on all models,USED/NEW ECU and Cluster swap, Reprogramming Keys , Immobilizer Delete,Cluster LCD Dispay Repair -Clik here
I am trusted TDI Mechanic, VCDS
MK6 Needle Sweep,MK5 with MK6 Cluster
jetta ,97 is offline   Reply With Quote
Page generated in 0.06850 seconds with 8 queries
[Output: 17.69 Kb. compressed to 16.08 Kb. by saving 1.61 Kb. (9.12%)]