View Single Post
Old May 23rd, 2008, 13:52   #39
lglamb
Veteran Member
 
Join Date: Aug 2006
Default Manual Tran Shift Cable Carrier

A few of us have had the plastic "Carrier" (at the tranny end of the upper shift cable) break.
Here's part photo and parts blowup.
Also shown is small pipe wrench that makes it easy to lift that locking tab, just fit it on the protrusion and lever it up.

Not a write-up, but pretty straightforward to figure out. Need to unbolt the lower cable to
slide the Carrier (#50) out and back in the metal bracket (#49). The bracket is loose without the Carrier, make sure you align the slider part (of bracket) with slidee part (#45).



lglamb is offline   Reply With Quote
 
Page generated in 0.06103 seconds with 8 queries
[Output: 14.35 Kb. compressed to 12.92 Kb. by saving 1.43 Kb. (9.98%)]