I have full schematic of the 98 jetta ECU (AHU),However I am in the middle of a 98 tdi to 98 tracker swap All IN house.(trans adapt.engine mounts oil filter adaptor.ETC)
My schematic only shows all devices to/from ecu Not What ecu pinout is. (IE mass airflow +/- 5v etc)
I would really apreciate a 1-68 pin designation.laman terms Not required.
master mech here 30+ yrs.
contacting my local dealer tells me ecu is OFF shore (by jetta VIN)..China/mexico..etc NOT usa or Canada.
speedo in MPH not KM.
for i can see a lil fondalation with speed sensor inputs & A/C requests coming my way,not to mention tach etc thats not a prob.
I Have a bently 98.5 & up manual But all those show 121 pins? or so.
it is on loan but owner says It can go if Need Be.
From what i have read @ bently the 68 pin not common for AHU in 8/98. Yes it has manifold charge tube to ECU.
Thnx Gg
My schematic only shows all devices to/from ecu Not What ecu pinout is. (IE mass airflow +/- 5v etc)
I would really apreciate a 1-68 pin designation.laman terms Not required.
master mech here 30+ yrs.
contacting my local dealer tells me ecu is OFF shore (by jetta VIN)..China/mexico..etc NOT usa or Canada.
speedo in MPH not KM.
for i can see a lil fondalation with speed sensor inputs & A/C requests coming my way,not to mention tach etc thats not a prob.
I Have a bently 98.5 & up manual But all those show 121 pins? or so.
it is on loan but owner says It can go if Need Be.
From what i have read @ bently the 68 pin not common for AHU in 8/98. Yes it has manifold charge tube to ECU.
Thnx Gg