I posted this in my starter post but no one responded so I will repost. While I was removing my starter there are three separate plug connections located on top of starter as part of the harness. The connection I am inquiring about is a two wire plug going to a round black solenoid looking component adjacent to the clutch master cylinder. I need to repair this connection because the wire is held on by only a couple of wire strands. The plug needs to be cut off and a new plug soldered on. Can anyone shed some light on this and let me know where I can get a replacement / repair plug. If you need photo's I will try and post them but I hope I described as best as I could where it is located.
Help Identify Wire Connection!
- Thread starter augie dog
- Start date