About one month ago I did a TB change with tools and parts from metalmanparts.com (thanks a ton, btw!). I used the .pdf file here in the How-To section and torqued the bolt on the cam sprocket to 33 ft-lbs.
After reading an old posting today, however, I am starting to wonder if I should go in and re-torque it for peace of mind. I am not at all concerned that my timing is off or that anything else is wrong, but I do not want that sprocket to slip!!!
Here is the thread I was reading:
http://forums.tdiclub.com/showthread.php?t=249034&highlight=cam+sproket+bolt+torque
I will be more than happy to re-torque the bolt if it needs it, but I do not want to over-torque it, either.
Josh
After reading an old posting today, however, I am starting to wonder if I should go in and re-torque it for peace of mind. I am not at all concerned that my timing is off or that anything else is wrong, but I do not want that sprocket to slip!!!
Here is the thread I was reading:
http://forums.tdiclub.com/showthread.php?t=249034&highlight=cam+sproket+bolt+torque
I will be more than happy to re-torque the bolt if it needs it, but I do not want to over-torque it, either.
Josh