TDIClub Forums

TDIClub Forums (http://forums.tdiclub.com/index.php)
-   Vendor & GroupBuy items for sale (http://forums.tdiclub.com/forumdisplay.php?f=62)
-   -   Race Pipes, EGR Delete Kit's, Block Off Plates. (http://forums.tdiclub.com/showthread.php?t=424742)

xTDIx September 29th, 2014 03:49

Race Pipes, EGR Delete Kit's, Downpipes, Turbo;s ect
 
Our PayPal is tdiguygr@gmail.com details about order in the notes. Please verify that your shipping address is current.
Shipping is via USPS, FedEx or UPS we always use 2-3 day shipping options.
All Prices are CURRENT and include shipping to the States. Shipping to Canada ADD $20
ALH Race Pipe Aluminum W Boost Port $34.99
PD150/PD130 Race Pipe 57mm Aluminum w Boost Gauge Port $49.99
BEW/BHW EGR Delete Kit-$34.99 Includes everything to delete your EGR and EGR cooler, without large front plate to leave EGR intact $24.99
Dog Collar Fix for BEW Engine $19.99
BRM Race Pipe Kit $79.99
Stainless Steel Braided Turbo Feed Line for MK4, includes new crush washers for the fitting near the Oil Filter $39.99
ALH Delete Kit with Race Pipe-$34.99
Turbo Feed Junction Banjo VNT15 VNT17 VW P/N: 028145786 $24.99
CBEA CJAA Race Pipe EGR Delete $49.99
Oil Catch Can for ALH includes everything needed for install. This one does not have an internal baffle $39.99
2009+ TDI Downpipe DPF Delete $449
PD150 Intake with Race Pipe $260
PD150 Intake with Race Pipe DRIVERS SIDE Inlet $250
PD150 Intake ONLY $165
OEM Volkswagen .658 5th Gear Conversion $225
ALH/BEW 2.5" 304 Stainless downpipe $300 3 left we aren't doing another run of these.
VNT-17 Billet Compressor Wheel Turbo by Midwest Turbo and Performance.
GT22 360 deg Thrust upgrade
improved journal bearing design
Step gap turbine end piston ring
Billet compressor wheel
$594.99 We are offering $50 to anyone who purchases this and provides us with a review.
Garrett VNT-17 GT1749VB ALH-$724.99 BEW-$749.99 gone
Billet VNT-15 by Midwest Turbo and Performance $499, over 20PSI with the same warranty that the major turbo manufactures offer Gone
VNT 17 Adapter for ALH engines $65 Aluminum, very high quality.
We have a lot of other parts as well. email for questions.

We are opening up a 2,500 sq ft shop in August for local pickup, tuning, repairs ect.

oilhammer September 29th, 2014 04:44

Do you include a replacement heater hose then?

xTDIx September 29th, 2014 04:54

Quote:

Originally Posted by oilhammer (Post 4628054)
Do you include a replacement heater hose then?


No sir, I include a hose barb. We have been using this method for years at the shop. No problems.

oilhammer September 29th, 2014 04:56

OK, just curious, that's all. I've been looking for a stateside source for the BHW's non-cooled EGR heater hose and had not yet found one. I didn't think you did, since you lumped the BEW and BHW together, and they would obviously need a different hose.

I was able to get one for the ALH without any problem, but I think that hose is used on some of the gas engines here. BHW is a bit more tricky.

piran21 October 3rd, 2014 15:37

Can one still pass emissions with the race pipe? I'm not familiar what it does differently vs the EGR delete kit alone.

xTDIx October 4th, 2014 06:18

Quote:

Originally Posted by piran21 (Post 4631943)
Can one still pass emissions with the race pipe? I'm not familiar what it does differently vs the EGR delete kit alone.


That I am not sure of, I have not had the pleasure of living in a state that has had emissions tests.

oilhammer October 6th, 2014 03:49

Removal of emission components is against Federal law, not state.

LNXGUY October 6th, 2014 06:27

Quote:

Originally Posted by piran21 (Post 4631943)
Can one still pass emissions with the race pipe? I'm not familiar what it does differently vs the EGR delete kit alone.

Sure, as long as you've got a tune and the readiness monitors are set to 'ready'

I just had my '05 BEW pass, it's got zero emissions equipment on it (Although I only use it 'off-road')

:)

xTDIx October 7th, 2014 02:53

Quote:

Originally Posted by oilhammer (Post 4633506)
Removal of emission components is against Federal law, not state.


Copy that, I appreciate the correction.

dowster October 7th, 2014 15:23

For those that don't know. What exactly is the MKIV trunk fix?

xTDIx October 8th, 2014 03:15

Quote:

Originally Posted by dowster (Post 4634881)
For those that don't know. What exactly is the MKIV trunk fix?


It's a fix for the broken plastic on the trunk release.

xTDIx October 27th, 2014 04:07

ALH Race Pipe is back in stock.

Jake_S October 27th, 2014 21:22

Pm sent

xTDIx December 2nd, 2014 06:02

December Bump

drywaller December 19th, 2014 20:56

Please excuse my ignorance. Can I completely remove the bew egr cooler and EVERYTHING associated with it when using your kit?
Is the barb fitting hardware store quality or better? I hardware store will it hold up to the high temps for years to come?


All times are GMT -7. The time now is 22:02.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017

Page generated in 0.08980 seconds with 8 queries
[Output: 16.88 Kb. compressed to 16.03 Kb. by saving 0.85 Kb. (5.06%)]