dmusic148
Member
Hi all. Have a CEL that Vag Com tells me is #2 glow plug. Tried reseating connector, no good. Bought a new plug, Autolite # 1116. Trouble is I can't get it to thread in-it's a 10mm x 1mm thread, which I think is correct, but no-go.
Now, the old one's threads are mashed over(?-never previously removed), reducing it's diameter to about 9.7mm. Should I run a tap into the hole to clean it up? Thanks, Dave
Now, the old one's threads are mashed over(?-never previously removed), reducing it's diameter to about 9.7mm. Should I run a tap into the hole to clean it up? Thanks, Dave