F
Reaction score
398

Profile posts Latest activity Postings Media Albums About

  • Hey Frank,
    I have come across your posts in looking for information on my 1.9L PD BRM I find that you own a TDI shop, I assume and/or sell upgrade parts. Really need your knowledge on stripped bolts on top end. I have found your contact info, would it be ok to contact you during business hours? Your help would be appreciated.
    Thanks, R
    F
    Franko6
    I guess I got a long email from you yesterday(?). I will answer there. If that email is not you, call: 417-232-4634
    Hello Frank,
    Am I to understand you sell parts?
    Is your store online?
    Yada, Yada, Yada
    Looking for tandem pump, cam replacement and non- stretch bolts

    Thank You (in advance)
    F
    Franko6
    RGZ,

    Sorry for the delay.

    If you haven't already gotten what parts you need, feel free to call. That or email is best contact method.

    Frank
    417-232-4634
    Franko6TDI@gmail.com
    Hey Frank I have a 2006 Brm with 130,000 miles. I put a colt cam in it and about 1,500 miles ago it lost some power. I popped open the valve cover to find premature wear. I had a stage two cam. I am looking for a cam kit with your improved bearings. I would also like to get new valve lifters and cam bearings studs. I live in long beach Ms
    F
    Franko6
    Sorry for the delay. I found this strange place with messages I didn't know about. You probably have already given up on me and gone elsewhere, but if not, please email or call: Franko6tdi@gmail.com or 417-232-4634

    Frank
    Hey Frank, I hear you are the Head Expert.
    I have a Head Crack question,.. 2002 ALH TDI. I am doing a new head gasket, sent the head out to get surfaced and found one chamber had a hairline crack from the injector, to the intake valve. Is this a 'replace the head' or 'run it' scenario? Been searching and a few have said that it's not a prob and run it. I would appreciate your input.
    Thanks!
    H
    HarlandJeptha
    I discovered the same crack in my 2006 BEW head yesterday, but I have not had the head resurfaced. I have the crack in the head on all 4 cylinders. While looking at the crack with a magnifying glass, I realized there's only about 1mm of aluminum between the injector hole to the valve seat. I thought, what were they thinking when they designed this head? I also am wondering how to proceed.
    Hello, have to replace the dreaded egg cooler...2006 MkV BRM, shaft leaking. I am VERY interested in the welded butterfly option. I am not sure how this messaging "system" works. I am located in Atlanta GA. tel 770-316-2047 call or text.
    J
    Jen-sama
    hah...EGR cooler
    F
    Franko6
    I was amused also... BAWK! BAWK!

    I didn't see this before. I don't know how I missed it. Sorry.... :/

    I have some deadlines to make today. I'll call in an hour or two. Ok?

    Frank
    Hello, I have a 2002 vw jetta alh. I was wondering what the cost for a full head rebuild is and what is involved?
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top